準確度好

1595A 的測量準確度在典型的測溫學比例（0.25到4.0）範圍內，可以達到0.2ppm。當電阻比在0.95~1.05範圍內，1595A電阻比準確度可以達到0.06ppm。您可以獲得傳統電阻電橋一樣的線性度，並且更容易使用。

專利的比率自校準功能

1594/95的專利的比率自校準功能可以完成比率準確度和線性度自校準功能，不需要外部設備，30分鐘內就可以完成測試。由於是自動校準，所以不會發生手動測試時誤操作的情況。

1秒/次的測量速度

超級測溫電橋1594/95可以達到1秒1次的測量速度（達到準確度的測量僅需2秒一次）。您可以用更少的時間完成您的測試，更準確地跟踪溫度的變化。

內置恆溫參考電阻

測溫電橋測量絕對電阻有多準，依賴於電橋的比率準確度，還有長期穩定性和內部參考電阻的校準準確度。為了確保電阻穩定性，消除環境條件變化帶來的誤差，超級測溫電橋1594/95內部的參考電阻被放置於一個溫度為30度，穩定性為±0.010℃的恆溫箱內。這些精密電阻被保存的非常好，24小時內電阻變化不超過0.25ppm（相當於0.00006℃）。

大屏幕中文菜單

超級測溫電橋1594/95擁有一個寬大、明亮的640 × 480全彩色VGA顯示屏，在任何視角都可清晰顯示。實測溫度以大字號突出顯示在顯示屏窗口頂部，在整個實驗室範圍內都清晰可見。能夠以°C、°F、K或Ω為單位查看測量結果。

測溫儀內置多種語言菜單，含中文，英文，法語，西班牙語等7種語言。菜單結構清晰，界面簡潔易用，操作者可以很容易學會。

Thermometry bridge accuracy combined with time-saving features

The Fluke Calibration 1594A and 1595A Super-Thermometers combine the accuracy of complex and expensive bridges with innovative features that simplify measurement processes and provide excellent value. They are accurate enough for the primary lab and economical enough for the secondary lab. With temperature-controlled internal reference resistors, six input channels, a large graphical display, and a multitude of temperature-specific measurement functions, PRT, thermistor and SPRT calibration (0 Ω to 500 kΩ) has never been so easy and economical. And with the built-in Ratio Self-Calibration function, you can verify or calibrate the Super-Thermometer’s ratio accuracy in-house with the press of a button—no other single thermometry bridge can do so much, so well!

Super-Thermometer features at a glance

• Calibrate SPRTs, PRTs, RTDs and thermistors (0 Ω to 500 k Ω)
• Accuracy as good as 0.06 ppm (0.000015 °C)
• “Ratio Self-Calibration” verifies and calibrates resistance ratio accuracy
• Automatic zero-power measurements calculate thermometer probe self-heating
• Temperature-controlled internal reference resistors
• Calibrated sensing current lowers overall instrument uncertainty
• Four input channels on the front panel accept sensors under test or external references
• Two dedicated external reference input channels on the rear panel
• Standby current reduces transient effects when scanning between channels
• Channel Select keys turn measurement mode on or off at the touch of a button
• Sample rates as fast as one second
• USB data transfer and computer control
• Remote view and device control via Ethernet
• Compatible with MET/TEMP II automated calibration software and LogWare II multichannel, real-time data acquisition software