榮夏科技為iseg Spezialelektronik GmbH 在TAIWAN台灣地區代理商

CPS mini modules are highly stable analog controlled High Voltage Power supplies. Modules of the CPS series can be used as standalone DC/DC converters. The output voltage is controllable with an analog interface with either a potentiometer (internal reference voltage) or an input analog control voltage. The modules are equipped with INHIBIT, current and voltage limits.

CPS mini modules can be operated as constant voltage or constant current source, depending on the limiting set value (VSETor ISET). The specification for ripple and noise and stability is valid for constant voltage mode only.
Via PIN “INH” the voltage generation is switched on with ramp, but switched off without ramp. A monitor voltage for the output current and output voltage is available via the IMON and VMON connections.

Input range: 22.8-25.2V

Ouput: Versions from 1 kV – 6 kV

Power: 8 watts

Ripple & noise: 10mV-20mV

 << 立即聯絡我們，獲得專業選型建議 >>

本文章引用自iseg Spezialelektronik GmbH 資訊

https://iseg-hv.com/en/products/detail/CPS