榮夏科技為VOX POWER在TAIWAN台灣地區代理商

Vox Power is extending its NEVO+ series output module range by adding digital control capability with a PMBus™ 1.2 compatible interface, enabling seamless integration into embedded systems via I²C.

These digital output modules bring intelligent control and monitoring features directly to each output module of the NEVO+600 and NEVO+1200 platforms while maintaining full mechanical compatibility with existing output module slots, allowing customers to add digital functionality without requiring an application redesign.

When configuring a NEVO+600 or NEVO+1200power solution, a digital “D” output module can now be selected in place of the standard analogue versions and, over PMBus™, monitor key operating parameters (voltage, current, power, temperature and status), adjust output settings such as output voltage and current limit, and store those settings to non-volatile memory so the module powers up in a predetermined state. This keeps the familiar NEVO mechanical format while adding full visibility and control at the output level.

The NEVO+ Digital Output Modules are available in multiple voltage classes with digitally controlled set-points within the ranges below:

OP1D: 0V–7.5V, 25A, 125W
OP2D: 0V–15V, 15A, 150W
OP3D: 0V–30V, 7.5A, 150W
OP4D: 0V–58V, 3.75A, 150W
OPA2D: 0V–15V, 25A, 300W
OPA3D: 0V–30V, 15A, 300W

本文章引用自Vox Power Ltd的網頁資訊

https://www.vox-power.com/2026/05/21/new-digital-enabled-output-modules-digital-devkit-for-nevo/